How much does it cost to run a table saw?
A table saw costs about 16¢ per hour, 1.2¢ a day, $0.35 a month and $4 a year at typical use (30 minutes a day, 1 days a week) and the U.S. average rate of 17.99¢/kWh. Benchtop and jobsite saws draw up to 15 A under load; they spend much of their run time spinning freely at lower draw.
Calculate your cost
Add as many devices as you like to compare them side by side. Search again to add another, or use Duplicate to compare two settings.
Cost by setting
| Setting | Watts | Per hour | Per day | Per month | Per year |
|---|---|---|---|---|---|
| Jobsite 15 A | 1,800 | 16¢ | 1.2¢ | $0.35 | $4 |
| Miter saw 15 A | 1,800 | 16¢ | 1.2¢ | $0.35 | $4 |
| Cabinet saw 3 HP 240 V | 3,700 | 33¢ | 2.4¢ | $0.72 | $9 |
At 30 minutes a day, 1 days a week and 17.99¢/kWh.
Cost by hours of use
| Hours per day | kWh/day | Per day | Per month | Per year (all year) |
|---|---|---|---|---|
| 1 hour | 0.13 | 2.3¢ | $0.70 | $8 |
| 2 hours | 0.26 | 4.6¢ | $1.41 | $17 |
| 4 hours | 0.51 | 9.3¢ | $2.82 | $34 |
| 8 hours | 1.03 | 19¢ | $5.63 | $68 |
| 12 hours | 1.54 | 28¢ | $8.45 | $101 |
| 24 hours | 3.09 | 56¢ | $16.90 | $203 |
Cost to run a table saw in every state
The same table saw costs $3 a year in North Dakota and $10 in Hawaii, at each state's average residential rate (12 months ending July 2026).
| State | Rate | Per hour | Per month | Per year |
|---|---|---|---|---|
| North Dakota | 12.32¢ | 11¢ | $0.24 | $3 |
| Idaho | 12.65¢ | 11¢ | $0.25 | $3 |
| Nebraska | 12.86¢ | 12¢ | $0.25 | $3 |
| Louisiana | 12.99¢ | 12¢ | $0.25 | $3 |
| Utah | 13.32¢ | 12¢ | $0.26 | $3 |
| Nevada | 13.36¢ | 12¢ | $0.26 | $3 |
| Arkansas | 13.43¢ | 12¢ | $0.26 | $3 |
| Tennessee | 13.56¢ | 12¢ | $0.27 | $3 |
| Oklahoma | 13.70¢ | 12¢ | $0.27 | $3 |
| Montana | 13.84¢ | 12¢ | $0.27 | $3 |
| Kentucky | 13.92¢ | 13¢ | $0.27 | $3 |
| Missouri | 13.95¢ | 13¢ | $0.27 | $3 |
| Wyoming | 14.01¢ | 13¢ | $0.27 | $3 |
| Washington | 14.12¢ | 13¢ | $0.28 | $3 |
| Iowa | 14.13¢ | 13¢ | $0.28 | $3 |
| South Dakota | 14.20¢ | 13¢ | $0.28 | $3 |
| Mississippi | 14.77¢ | 13¢ | $0.29 | $3 |
| North Carolina | 14.77¢ | 13¢ | $0.29 | $3 |
| Kansas | 15.09¢ | 14¢ | $0.30 | $4 |
| Georgia | 15.12¢ | 14¢ | $0.30 | $4 |
| New Mexico | 15.32¢ | 14¢ | $0.30 | $4 |
| Florida | 15.39¢ | 14¢ | $0.30 | $4 |
| Arizona | 15.40¢ | 14¢ | $0.30 | $4 |
| West Virginia | 15.48¢ | 14¢ | $0.30 | $4 |
| Oregon | 15.50¢ | 14¢ | $0.30 | $4 |
| South Carolina | 15.64¢ | 14¢ | $0.31 | $4 |
| Texas | 15.96¢ | 14¢ | $0.31 | $4 |
| Minnesota | 16.22¢ | 15¢ | $0.32 | $4 |
| Alabama | 16.44¢ | 15¢ | $0.32 | $4 |
| Virginia | 16.48¢ | 15¢ | $0.32 | $4 |
| Colorado | 16.58¢ | 15¢ | $0.32 | $4 |
| Indiana | 16.94¢ | 15¢ | $0.33 | $4 |
| Delaware | 17.79¢ | 16¢ | $0.35 | $4 |
| Ohio | 18.25¢ | 16¢ | $0.36 | $4 |
| Wisconsin | 18.74¢ | 17¢ | $0.37 | $4 |
| Illinois | 18.79¢ | 17¢ | $0.37 | $4 |
| Pennsylvania | 20.70¢ | 19¢ | $0.41 | $5 |
| Maryland | 21.03¢ | 19¢ | $0.41 | $5 |
| Michigan | 21.05¢ | 19¢ | $0.41 | $5 |
| New Jersey | 23.78¢ | 21¢ | $0.47 | $6 |
| Vermont | 23.80¢ | 21¢ | $0.47 | $6 |
| District of Columbia | 24.20¢ | 22¢ | $0.47 | $6 |
| New Hampshire | 26.67¢ | 24¢ | $0.52 | $6 |
| Alaska | 26.85¢ | 24¢ | $0.53 | $6 |
| Connecticut | 27.99¢ | 25¢ | $0.55 | $7 |
| New York | 28.39¢ | 26¢ | $0.56 | $7 |
| Rhode Island | 29.27¢ | 26¢ | $0.57 | $7 |
| Maine | 29.31¢ | 26¢ | $0.57 | $7 |
| Massachusetts | 30.43¢ | 27¢ | $0.60 | $7 |
| California | 32.99¢ | 30¢ | $0.65 | $8 |
| Hawaii | 43.51¢ | 39¢ | $0.85 | $10 |
How to cut the cost
- Keep blades sharp and clean of pitch; dull blades increase motor load.
- Turn the saw off between cuts during layout.
- Use the right blade (rip vs crosscut) for the job.
Cheaper ways to get the job done
Clean blades cut with less effort.
See options on AmazonWe may earn a commission from qualifying purchases. It never changes the numbers we show. Disclosure.
Compare with similar appliances
| Appliance | Watts | Typical use | Per month | Per year |
|---|---|---|---|---|
| Table saw | 1,800 | 30 minutes a day, 1 days a week | $0.35 | $4 |
| Circular saw | 1,500 | 15 minutes a day, 1 days a week | $0.29 | $4 |
| Shop vac | 1,200 | 15 minutes a day, 1 days a week | $0.23 | $3 |
| Bench grinder | 400 | 15 minutes a day, 1 days a week | $0.08 | $1 |
| Air compressor | 1,500 | 1 hour a day, 1 days a week | $0.59 | $7 |
| Welder | 2,400 | 1 hour a day, 1 days a week | $0.56 | $7 |
| Tool battery charger | 100 | 1 hour a day, 2 days a week | $0.29 | $3 |
Head-to-head comparisons
Frequently asked questions
How much does it cost to run a table saw per hour?
A table saw drawing 1,800 watts uses 0.90 kWh per hour while running (50% duty cycle). At the U.S. average of 17.99¢/kWh that's 16¢ per hour. In North Dakota (12.32¢) it's 11¢. In Hawaii (43.51¢) it's 39¢.
How much does it cost to run a table saw per month?
At typical use (30 minutes a day, 1 days a week), a table saw costs about $0.35 a month and $4 a year, at the U.S. average rate. Enter your ZIP in the calculator above for your utility's rate.
How many watts does a table saw use?
Most table saws use 1,200 to 3,700 watts, depending on the setting (jobsite 15 a 1,800 W, miter saw 15 a 1,800 W, cabinet saw 3 hp 240 v 3,700 W). Starting surge can reach 4,000 W. Check the label on the back or bottom for your model's exact rating.
How many kWh does a table saw use?
About 0.06 kWh a day and 23 kWh a year at typical use (30 minutes a day, 1 days a week).
Does a table saw use a lot of electricity?
No. At about 23 kWh a year it's a small share (0.2%) of the average U.S. home's 10,492 kWh.
Is it cheaper to run a table saw or a circular saw?
At typical use, a table saw costs about $4 a year versus $4 for a circular saw. So the circular saw is cheaper by about $1 a year. Use the comparison table above to compare them at your own settings.
How can I lower the cost of running a table saw?
- Keep blades sharp and clean of pitch; dull blades increase motor load.
- Turn the saw off between cuts during layout.
- Use the right blade (rip vs crosscut) for the job.
Rates updated 2026-10-21: EIA data through July 2026. Typical wattage and usage reviewed against DOE, ENERGY STAR and manufacturer specs. Methodology.